Open-End Stainless Steel-Stainless Steel Dome and Flange Head Rivets For product information or to request a catalog, please call: 415.861.8300 or fax: 415.552.0796

Available Materials: Stainless steel head with a stainless steel mandrel

View Last Rivet Type  Technical Specs Menu  View Next Rivet Type

Part Number	Rivet Body Diameter	Hole Size & Drill Number	Grip Range in Inches	Length Under Head (Maximum)	Head Diameter (Nominal)	Head Height (Maximum)	Typical Sheer Strength (lb.)*	Typical Tensile Strength (lb.)*
SSD42SSBS	.125 (1/8)	.129-.133 #30	.031-.125	.265	.250	.040	550	700
SSD43SSBS	.125 (1/8)	.129-.133 #30	.126-.187	.328	.250	.040	550	700
SSD44SSBS	.125 (1/8)	.129-.133 #30	.188-.250	.390	.250	.040	550	700
SSD46SSBS	.125 (1/8)	.129-.133 #30	.251-.375	.515	.250	.040	550	700
SSD48SSBS	.125 (1/8)	.129-.133 #30	.376-.500	.640	.250	.040	550	700
SSD42SSBSLF	.125 (1/8)	.129-.133 #30	.031-.125	.265	.375	.065	550	700
SSD43SSBSLF	.125 (1/8)	.129-.133 #30	.126-.187	.328	.375	.065	550	700
SSD44SSBSLF	.125 (1/8)	.129-.133 #30	.188-.250	.390	.375	.065	550	700
SSD52SSBS	.156 (5/32)	.160-.164 #20	.063-.125	.290	.312	.047	900	1130
SSD54SSBS	.156 (5/32)	.160-.164 #20	.126-.250	.415	.312	.047	900	1130
SSD56SSBS	.156 (5/32)	.160-.164 #20	.251-.375	.540	.312	.047	900	1130
SSD62SSBS	.187 (3/16)	.192-.196 #11	.063-.125	.315	.375	.055	1000	1375
SSD64SSBS	.187 (3/16)	.192-.196 #11	.126-.250	.440	.375	.055	1000	1375
SSD66SSBS	.187 (3/16)	.192-.196 #11	.251-.375	.565	.375	.055	1000	1375
SSD68SSBS	.187 (3/16)	.192-.196 #11	.376-.500	.690	.375	.055	1000	1375
* -- Values shown are a guide only and may vary depending upon the application.

View Last Rivet Type  Technical Specs Menu  View Next Rivet Type

For product information or to request a catalog, please call: 415.861.8300 or fax: 415.552.0796